|
|
Coprise |
production solutions for industry |
Service: 956-541-7393 |
® |
© I&J Fisnar Inc. 2007 all rights reserved |
Positive Displacement Valves for Precision Dispensing |
PDV-1000 Auger Valve - Positive Displacement Valve A PDV-1000 auger valve is commonly used to dispense small amounts of solder paste. The auger valve or screw valve is a servo driven system requiring the addition of a PDC-2000 controller for rotation speed, fluid pressure and reverse drive affecting snuff-back. The auger pitch or Archimedes screw is matched to the mesh size of the solder paste. An auger valve may be used to dispense a material greater than 35,000cps that could include a filler. |
VDP150 Volumetric Positive Displacement Valve Low to medium viscosities liquids of 5000 - 20,000cps not containing filler may be volumetrically dispensed in the microliter range using the model VDP150. The valve is adjustable from 0.005cc - to 0.015cc and is operated by a 4 way valve controller model VC-1195A to control the two internal check valves within the main body of the volumetric valve. |
VC1195A 4-Way Valve Controller The VC1195A dispensing valve controller can be used with any I&J Fisnar liquid dispensing valve designed for 4-way control, meaning a dispensing valve accommodating a time sequenced air pulse to open the valve and a sequenced air pulse to close the valve. Such a controller permits faster cycling and replaces the dependency upon a conventional return spring. |
Texas & Mexico |
PDC-2000 Auger Valve Controller The PDC-2000 controller provides precise controls for the PDV-1000 series of auger valves. These include rotation speed, fluid pressure and reverse drive affecting snuff-back. |